 |
 |
|
|
URC's Consumer Remotes Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | anyone figured out IR codes for Dish Hopper? This thread has 25 replies. Displaying posts 16 through 26. |
|
| Post 16 made on Tuesday March 5, 2013 at 14:45 |
danmcg Founding Member |
Joined:
Posts: | March 2002
14 |
|
|
Pretty sure these are right. I found many more for these 3 functions, but these are the first that I came across for each one. Someone want to verify that they work on their Hopper also?
Live TV - 97
0000 0048 0001 0011 0018 0162 0018 005E 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 005E 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 0162
Search - 102
0000 0048 0001 0011 0018 0162 0018 005E 0018 00A5 0018 00A5 0018 005E 0018 005E 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 0162
On Demand - 116
0000 0048 0001 0011 0018 0162 0018 005E 0018 005E 0018 00A5 0018 005E 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 0162
|
|
| Post 17 made on Friday December 27, 2013 at 11:53 |
danjoman Lurking Member |
Joined:
Posts: | December 2013
1 |
|
|
Thank you for the HOPPER Hex codes! I was able to successfully use them to finish programming a BitWise BC4 controller for my iPad and they functioned perfectly on my HOPPER. I've been looking for the Search and Live TV codes everywhere! Thanks again!
|
|
| Post 18 made on Friday December 27, 2013 at 16:57 |
JoeFlabitz Select Member |
Joined:
Posts: | December 2008
1,517 |
|
|
On December 27, 2013 at 11:53, danjoman said...
Thank you for the HOPPER Hex codes! I was able to successfully use them to finish programming a BitWise BC4 controller for my iPad and they functioned perfectly on my HOPPER. I've been looking for the Search and Live TV codes everywhere! Thanks again! Glad you were able to get that BitWise working based on info from the URC forum... :>/
|
|
| Post 19 made on Saturday January 18, 2014 at 11:10 |
audvid Founding Member |
Joined:
Posts: | August 2001
114 |
|
|
Could you please let me know how I can incorporate these HEX codes into my CCP software? I have never used hex codes in CCP. Just curious to learn.. Thanks.. On March 5, 2013 at 14:45, danmcg said...
Pretty sure these are right. I found many more for these 3 functions, but these are the first that I came across for each one. Someone want to verify that they work on their Hopper also?
Live TV - 97
0000 0048 0001 0011 0018 0162 0018 005E 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 005E 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 0162
Search - 102
0000 0048 0001 0011 0018 0162 0018 005E 0018 00A5 0018 00A5 0018 005E 0018 005E 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 0162
On Demand - 116
0000 0048 0001 0011 0018 0162 0018 005E 0018 005E 0018 00A5 0018 005E 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 00A5 0018 0162
|
|
| Post 20 made on Saturday January 18, 2014 at 18:05 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,839 |
|
|
Copy one of the hex above at a time, go into CCP software, open a file, pick a device, select a key, than open the universal browser, click HEX, paste the code there, than drag it to the key of your choice. Repeat.
|
|
| Post 21 made on Friday May 30, 2014 at 18:23 |
patsat Long Time Member |
Joined:
Posts: | March 2005
14 |
|
|
The DNW remote does not transmit IR under the SAT Mode. So you cannot teach it to the smart remote IR Learning Mode.
|
Patrick Young |
|
| Post 22 made on Sunday August 3, 2014 at 02:49 |
mark12345 Lurking Member |
Joined:
Posts: | August 2014
3 |
|
|
I'm not as versed on all the tech talk. I've used my MX-500 for 5+ years, configured to learn other remotes, though can't figure out the new remote used for my Dish Hopper/Joey.
I understand it only broadcast RF, so this is where I'm stuck. I've read somewhere that I can point both remotes at the Hopper while I learn from one remote to another but was unsuccessful here too.
I did enable IR on hopper, but still no luck.
Any help will be greatly appreciated.
|
|
| Post 23 made on Sunday August 3, 2014 at 04:43 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,839 |
|
|
If the hopper can accept IR, it probably like other Dish receivers with 16 or so IR addresses available. Make sure its set to #1. Then try the preset codes in the mx-500 under EchoStar.
|
|
| Post 24 made on Sunday August 3, 2014 at 20:47 |
mark12345 Lurking Member |
Joined:
Posts: | August 2014
3 |
|
|
Thanks edmund!
Is there a site where I can find the codes for the Red, Green, Yellow, and Blue buttons on the Hopper remote?
|
|
| Post 25 made on Monday August 4, 2014 at 02:13 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,839 |
|
|
In the mx-500, no way. Too old of a remote. And it doesn't accept discrete commands at all, you need to use a second remote with that feature. And then possible teach the missing commands to the mx-500.
|
|
| Post 26 made on Monday August 4, 2014 at 18:13 |
mark12345 Lurking Member |
Joined:
Posts: | August 2014
3 |
|
|
bummer...
or, yeah I have reason to upgrade :)
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
