Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Tannoy IW62TDC
This thread has 7 replies. Displaying all posts.
Post 1 made on Wednesday April 7, 2021 at 17:30
Chris L
Founding Member
Joined:
Posts:
October 2001
355
Looking for a set of replacement grills for these.
Painter rolled them...

Any idea who distributes their products in the USA?
Post 2 made on Wednesday April 7, 2021 at 20:22
buzz
Super Member
Joined:
Posts:
May 2003
4,366
How long has it been since being painted? You may be able to soak the grills in a solvent and remove the new paint. The solvent could be as easy as water and some ammonia.

Beyond that, you could use paint remover and go back to bare metal. I had a floor convection heating system grill, probably from the 1800's that had been painted so many times that some of the holes were filled (these were not tiny speaker grille holes). It originally looked grisly. It was not quick and easy, but I went back to bare metal, then used rust remover and repainted with primer and satin enamel. The grille looked brand new. To some extent this was not the original intention for this antique because it had been blued, not painted, but black paint fit the current decore better than irregularly faded ancient bluing.

Painting the speaker grille will probably be a challenge unless you are skilled with airbrushing. My guess is that you (or the painter) would need to airbrush, then bake the enamel. Uniformly covering, but not clogging the sides of the holes is the tough part. Maybe dipping in somewhat diluted paint, then blowing the holes open with a gentle blast of air is a better plan.
OP | Post 3 made on Wednesday April 7, 2021 at 21:02
Chris L
Founding Member
Joined:
Posts:
October 2001
355
That would be the second choice since the contractor removed the grill with a screwdriver...
Post 4 made on Wednesday April 7, 2021 at 22:34
buzz
Super Member
Joined:
Posts:
May 2003
4,366
!! And probably tried to fix things with some caulk.

I'd be tempted to turn that screwdriver toward the contractor.
OP | Post 5 made on Thursday April 8, 2021 at 09:55
Chris L
Founding Member
Joined:
Posts:
October 2001
355
Painters first...
Post 6 made on Saturday April 10, 2021 at 15:59
Vertical AV
Long Time Member
Joined:
Posts:
April 2009
154
Did you find a contact yet, it depends what region of the country your in. I have a contact for the Midwest, not sure if that would help you.
Electrician, Engineer, Installer
North Country
Post 7 made on Saturday April 10, 2021 at 17:12
buzz
Super Member
Joined:
Posts:
May 2003
4,366
There is a spare parts portal.
Post 8 made on Sunday April 11, 2021 at 16:34
Neurorad
Super Member
Joined:
Posts:
September 2007
3,011
FYI, old thread discussing the Preval sprayer...
[Link: remotecentral.com]
TB A+ Partner
Believe nothing, no matter where you read it, or who said it, no matter if I have said it, unless it agrees with your own reason and your own common sense. -Buddha


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse