Happy weekend folks! Anyone pull off two point to point connections? Looking to make a right angle around some dense woods, 1/2 mile and 200yard links. Have had great success with loco m900’s but have never tried a “double hop” before. Thanks kindly!
So, went a different direction on this and used a pair of Gen2 5ac nanobeams aimed at a rocket ac5 / Omni antenna combo. Link one is about 2700’ and link two at 1600’. Off the router was getting 240/40 but at end point 40/40. Client is pretty happy with it but I was really hoping to get full throughput. The QAM constellation was pretty scattered on link one vs link two and though we have clear LoS we have it punching into a wooded area with about a 15’ x 15’ opening. Any ideas if the pattern would be wider than this? We’re pushing 20/40Mhz, and I read dropping to 10Mhz might help... Appreciate any input!
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.