Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Cisco SG350 & Just Add Power
This thread has 8 replies. Displaying all posts.
Post 1 made on Tuesday March 19, 2019 at 06:50
tca
Advanced Member
Joined:
Posts:
December 2005
845
We are using our first SG 350 switch with Just Add Power. We have used the SG300 in the past with no issues. The switch immediately shuts down when we connect the network to port 1. The switch cannot be reached. I think there is something wrong with the DHCP feature. If we factory reset the switch, and give a computer a static ip in the 192.168.1.0 range we can access the switch on 192.168.1.254. As soon as we plug the network into port 1, the switch shuts down.

If anyone has any experience with this, please let me know. I've stayed up all night trying to figure this out.

Thanks.
Post 2 made on Tuesday March 19, 2019 at 08:59
sceneselect
Long Time Member
Joined:
Posts:
March 2012
425
Do you mean port 1 as in the first actual port on the switch? Or port 1 in the JAP config file?

When configuring JAP you need to leave a port or two open at the end of beginning strings for connectivity. Maybe try connecting to the last port on the switch..?
Post 3 made on Tuesday March 19, 2019 at 09:20
lippavisual
Senior Member
Joined:
Posts:
December 2007
1,458
Is your network uplink coming from another switch??

If so, there is a port setting (I forgot what its called though) that will shutdown that particular port when it senses another switch. It's a "security" feature.
Post 4 made on Tuesday March 19, 2019 at 09:28
Duct Tape
Loyal Member
Joined:
Posts:
November 2008
5,295
this is why newborn infant baby Jesus suggests using Luxul switches with JustAddPower.
[Link: facebook.com]
Post 5 made on Tuesday March 19, 2019 at 09:36
Duct Tape
Loyal Member
Joined:
Posts:
November 2008
5,295
[Link: facebook.com]
Post 6 made on Tuesday March 19, 2019 at 10:36
BlackWire Designs
Senior Member
Joined:
Posts:
September 2006
1,401
Did you run the latest JAD config on the switch?
BlackWire Designs
Post 7 made on Tuesday March 19, 2019 at 10:56
Lowhz
Senior Member
Joined:
Posts:
April 2012
1,168
On March 19, 2019 at 09:28, Duct Tape said...
this is why newborn infant baby Jesus suggests using Luxul switches with JustAddPower.

LOL. +1
Post 8 made on Tuesday March 19, 2019 at 11:06
BlackWire Designs
Senior Member
Joined:
Posts:
September 2006
1,401
On March 19, 2019 at 09:28, Duct Tape said...
this is why newborn infant baby Jesus suggests using Luxul switches with JustAddPower.

LOL +5836295926295
BlackWire Designs
Post 9 made on Wednesday March 20, 2019 at 02:48
Nded
Just Add Power
Joined:
Posts:
September 2009
348
Please call J+P support at 800-615-0206 and they will get you going with that switch.
Ed Qualls - Just Add Power - Proud to advertise on and support Remote Central


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse