|
|
|
Philips Pronto Professional Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | IR cables for RFX9600 This thread has 12 replies. Displaying all posts. |
|
Post 1 made on Saturday June 26, 2010 at 09:47 |
Hi,
I just bough a used RFX9600 which came without the IR cables.
Where can I buy some?
Or is it possible to build them? Are the schematics available somewhere? I guess it just needs IR leds, and maybe a couple of resistors...
Thanks for your help,
|
Frédéric |
|
Post 2 made on Saturday June 26, 2010 at 15:05 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,996 |
|
|
You can use single or double emitters (wired in series) with mono plug where sleeve is ground and tip is positive voltage. You can get these off Ebay or other sites or you can order philips replacements from http://www.servicewidetech.com (in the states) or from your distributor.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Post 3 made on Saturday June 26, 2010 at 16:17 |
BluPhenix Long Time Member |
Joined: Posts: | December 2008 371 |
|
|
Basically the IR emitter is just one IR LED wired from tip to sleeve. Mind that I don't know it the IR outputs are current-regulated so the dides don't get butned or if you have to add a current limiter resistor in series with the IR LED. Can check it, but not sooner than monday.
If you bought a new RFX9600 it the cables (2 double IR cables) should be in the box.
|
|
OP | Post 4 made on Saturday June 26, 2010 at 16:51 |
|
Post 5 made on Saturday June 26, 2010 at 23:35 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,996 |
|
|
Should be but they are "Blick" emitters. I think that means that they flash a bit of visible LED light when a signal is sent.
I've not tried the triple emitters but if they are wired in series, they should be OK.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
OP | Post 6 made on Sunday June 27, 2010 at 05:04 |
Ok. The price is not very high, so I will give it a try...
Thanks.
|
Frédéric |
|
OP | Post 7 made on Sunday June 27, 2010 at 06:03 |
I also found a cable to connect a pronto to a AV device. It is explained that the Pronto outpus 2.5V, and the AV-receiver inputs 5V (the cable make the conversion): [Link: cgi.ebay.com]Does it mean that the above cables are used on 5V systems? So, the Pronto won't be able to drive 2 serial leds; they have to be connected //... And what about the wave length? Are all these cables really universal regarding this point?
|
Frédéric |
|
Post 8 made on Sunday June 27, 2010 at 10:29 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,996 |
|
|
If you have the Oppo, buy the cable.
If not, buy the single or dual emitters.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
OP | Post 9 made on Sunday June 27, 2010 at 17:24 |
I don't have the OPPO, but if the standard is 5V, the 2.5V of the Pronto may not be enough to drive 2 leds in serial...
|
Frédéric |
|
Post 10 made on Sunday June 27, 2010 at 19:43 |
buzz Super Member |
Joined: Posts: | May 2003 4,376 |
|
|
fma,
Dual emitters are packed in the box with RFX9600's and RFX9400's.
|
|
OP | Post 11 made on Monday June 28, 2010 at 07:10 |
Ok, I will buy the dual led cable.
Thanks.
|
Frédéric |
|
Post 12 made on Monday June 28, 2010 at 08:42 |
Franin Long Time Member |
Joined: Posts: | April 2008 195 |
|
|
Cat 5 cable will help too!!
|
Thanks
Frank |
|
OP | Post 13 made on Monday June 28, 2010 at 09:48 |
Ok. But the receivers will be very close, and I plan to cut the wires to make them shorter...
|
Frédéric |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|