|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Prodigy and Crestron This thread has 20 replies. Displaying posts 1 through 15. |
|
Post 1 made on Tuesday December 20, 2016 at 11:21 |
SWOInstaller Select Member |
Joined: Posts: | October 2010 1,595 |
|
|
We have a customer that has a prodigy system (4 audio zones and a PTX-3 for control of a theatre).
I know there is a firmware for the prodigy processor to allow the Crestron devices to communicate to it, but is there a firmware for the P-AMP and hardwired keypads (don't remember the model numbers) that will allow them to communicate to a Crestron processor.
The reason for the inquiry is their PTX-3 remote has died and they want a new one. the PTX3 (obviously discontinued) along with the MTX-3 so I want to suggest replacing the processor with an MC3 and get a new remote but want to ensure that the existing Prodigy equipment will communicate with the MC3 before I suggest this.
|
You can't fix stupid |
|
Post 2 made on Tuesday December 20, 2016 at 11:59 |
weddellkw Long Time Member |
Joined: Posts: | January 2013 186 |
|
|
You can add the Prodigy devices to normal (Full) Crestron systems now. This was enabled via database updates a while back.
|
|
Post 3 made on Tuesday December 20, 2016 at 12:17 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
As long as their Prodigy is a 3 series, why would you replace it? After applying the firmware, it becomes a MC3 with 1 program slot.
|
"Quality isn't expensive, it's Priceless!" |
|
OP | Post 4 made on Tuesday December 20, 2016 at 12:51 |
SWOInstaller Select Member |
Joined: Posts: | October 2010 1,595 |
|
|
On December 20, 2016 at 12:17, kgossen said...
As long as their Prodigy is a 3 series, why would you replace it? After applying the firmware, it becomes a MC3 with 1 program slot. I don't remember if it was a PMC3 or PMC2 but for some reason I am thinking its a PMC2
|
You can't fix stupid |
|
Post 5 made on Tuesday December 20, 2016 at 14:03 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
On December 20, 2016 at 12:51, SWOInstaller said...
I don't remember if it was a PMC3 or PMC2 but for some reason I am thinking its a PMC2 Then he's hooped!
|
"Quality isn't expensive, it's Priceless!" |
|
Post 6 made on Wednesday December 21, 2016 at 08:05 |
FASTLs Long Time Member |
Joined: Posts: | October 2004 480 |
|
|
Believe it is the PMC3-XP that can be upgraded with firmware to control all. Can still find on ebay.
FASTLS
|
|
Post 7 made on Wednesday December 21, 2016 at 10:33 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
On December 21, 2016 at 08:05, FASTLs said...
Believe it is the PMC3-XP that can be upgraded with firmware to control all. Can still find on ebay.
FASTLS Or the PMC3. Have done a couple for customers. Originally you had to have the XP version but the firmware works on all 3 series Prodigy processors.
|
"Quality isn't expensive, it's Priceless!" |
|
OP | Post 8 made on Wednesday December 21, 2016 at 11:55 |
SWOInstaller Select Member |
Joined: Posts: | October 2010 1,595 |
|
|
I went onsite today to fix a couple other issues and confirmed that it is a PMC2 they have. I have confirmed with Crestron that all the existing prodigy equipment can be controlled by a 3-series Crestron processor as long as the prodigy equipment's firmware is up to date/most recent for prodigy and that the Crestron processor has the latest firmware and the programming software is running the latest releases.
|
You can't fix stupid |
|
Post 9 made on Wednesday August 9, 2017 at 12:46 |
SWFLMike Long Time Member |
Joined: Posts: | January 2007 356 |
|
|
Does this enable a PMC3 to be used as a slave as well? Can you drop in in as a separate processor using a 3-series EISC?
|
|
Post 10 made on Wednesday August 9, 2017 at 14:52 |
thecynic315 Senior Member |
Joined: Posts: | August 2008 1,001 |
|
|
On August 9, 2017 at 12:46, SWFLMike said...
Does this enable a PMC3 to be used as a slave as well? Can you drop in in as a separate processor using a 3-series EISC? You could always use an EISC. Can't add the PMC3 as a slave though.
|
|
Post 11 made on Wednesday August 9, 2017 at 19:55 |
SWFLMike Long Time Member |
Joined: Posts: | January 2007 356 |
|
|
That's actually kind of interesting... What's the difference?
|
|
Post 12 made on Thursday August 10, 2017 at 12:28 |
thecynic315 Senior Member |
Joined: Posts: | August 2008 1,001 |
|
|
On August 9, 2017 at 19:55, SWFLMike said...
That's actually kind of interesting... What's the difference? an EISC lets you send/receive data between two programs. slaving a control processor means it isn't running a program, instead the Master is talking directly to the slave's IR/COM/etc
|
|
Post 13 made on Thursday August 10, 2017 at 18:16 |
SWFLMike Long Time Member |
Joined: Posts: | January 2007 356 |
|
|
Ah OK, thanks. And that makes more sense given the situation I'm working with.
|
|
Post 14 made on Friday January 26, 2018 at 15:19 |
BlueSun Lurking Member |
Joined: Posts: | January 2018 2 |
|
|
Hello, i'm new in the Forum... i'm from Germany and i have bought a pmc3... now i want to ad two c2n-cb, but i couldn't see the devices on the crenet of the pmc3. Which Firmware i have to load to use normal Crestron Hardware on the pmc3? I hope somebody could help me...
|
|
Post 15 made on Friday January 26, 2018 at 17:49 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
On January 26, 2018 at 15:19, BlueSun said...
Hello, i'm new in the Forum... i'm from Germany and i have bought a pmc3... now i want to ad two c2n-cb, but i couldn't see the devices on the crenet of the pmc3. Which Firmware i have to load to use normal Crestron Hardware on the pmc3? I hope somebody could help me... Load the latest firmware for that processor, should be for the PMC3XP it will work with yours, have done it before. Just login to the Crestron site and it's there.
|
"Quality isn't expensive, it's Priceless!" |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|