Post 1 made on Sunday July 7, 2019 at 14:43 |
joltman Long Time Member |
Joined: Posts: | February 2019 17 |
|
|
All,
I've got the programming done for my MSC-400 smart macros and have mapped those to buttons on the MX-990. I've chosen several different RF IDs and still the RFX-250 has the RF LED lit. I've downloaded the config to the MSC-400 after each change but I'm still seeing interference. I would think that even with the interference I'd still be able to send some commands, but nothing is getting from the remote to the MSC-400. Am I missing a setting on the MX-990 for configuring the matching RF ID? I thought I looked all over the CCP and I'm not seeing it. Any thoughts? I'm going to try a 3.5mm stereo extender and see if I get the RFX-250 further away from the server rack and AV rack if that makes a difference. Thanks!
|
|
Post 2 made on Sunday July 14, 2019 at 15:48 |
piker Long Time Member |
Joined: Posts: | January 2003 168 |
|
|
You need to open "Configure Home", click on the MSC400, click on "Properties" make sure the RF ID is set the same as the MX, save the changes and download to the MSC400.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.