| Post 1 made on Monday February 19, 2007 at 22:54 |
BigFiasco Lurking Member |
Joined:
Posts: | December 2004
8 |
|
|
Evening folks,
I'm curious to know if anyone has ever seen this before on an mx-950. I justfinished the programming and after testing the on macro to see if all was well I get an error. The macro seems to work fine but instead of jumping to the particular device page I get a page with MCL-02 on it. If I then press the main button and select an activity the jump feature works fine. If I select the on macro again I get the same error, MCL-02, except there are now two of the codes on the screen. Any ideas? I've tried the reset button as well as uploading a blank configuration. I'm stumped.
|
|
| OP | Post 2 made on Monday February 19, 2007 at 23:43 |
BigFiasco Lurking Member |
Joined:
Posts: | December 2004
8 |
|
|
Error in the programming I guess. I redid the entire remote and uploaded it with no problems.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
