|
|
|
Complete Control by URC Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | MX-3000 IR code problem This thread has 11 replies. Displaying all posts. |
|
Post 1 made on Friday February 8, 2008 at 19:59 |
burntout Lurking Member |
Joined: Posts: | February 2008 8 |
|
|
I had posted a topic before about this same problem, Ive done alot more testing and even reinstalled the program and I'm still at the same point. At this point in time I'm looking for advice or answers to help me fix my problem. I've been having a problem where I go to save the IR data from the IR database to the devices I have setup on the remote. Ive tried using the Save ALL option, and tried the way of picking the command from the list and dragging it to the particular button I want to associate it with. Ive even tried learning the Ir data from the remote from the particular device I want to program. All this and still when I put the data onto the MX-3000, nothing works. I hit the button and the tv or anything wont turn on. Now I've tried making a totally blank template, just putting one device and the doing the "newbie" way, and still the remote doesnt control anything... This remote has worked before on an old template and when I put that old info on it, some of the devices still work. At this point I'm very frustrated cause I have made 2 nice templates with all the devices and everything and none of them are working properly.
If you could give me any type of reback or any idea I would greatly appreciate it, Ive been battling with this issue for well over a week now.
|
|
Post 2 made on Friday February 8, 2008 at 20:17 |
J.Todd Long Time Member |
Joined: Posts: | August 2007 481 |
|
|
|
OP | Post 3 made on Friday February 8, 2008 at 20:31 |
burntout Lurking Member |
Joined: Posts: | February 2008 8 |
|
|
I have sent you an email with the file.
|
|
Post 4 made on Friday February 8, 2008 at 20:53 |
J.Todd Long Time Member |
Joined: Posts: | August 2007 481 |
|
|
|
Post 5 made on Friday February 8, 2008 at 22:29 |
vbova27 Super Member |
Joined: Posts: | July 2006 2,987 |
|
|
On February 8, 2008 at 20:53, J.Todd said...
You have mail So what happened?
|
|
OP | Post 6 made on Friday February 8, 2008 at 22:50 |
burntout Lurking Member |
Joined: Posts: | February 2008 8 |
|
|
So changed the ir codes on his side, but then when I opened it the devices were fine. But then when I went to see the other devices and go back to the device I was just at it would change back to some random one again..... I have no idea whats going on.
|
|
Post 7 made on Friday February 8, 2008 at 23:15 |
J.Todd Long Time Member |
Joined: Posts: | August 2007 481 |
|
|
On February 8, 2008 at 22:50, burntout said...
So changed the ir codes on his side, but then when I opened it the devices were fine. But then when I went to see the other devices and go back to the device I was just at it would change back to some random one again..... I have no idea whats going on. I went back and saved as a new name, then down loaded into mx-3000, uploaded, opened it and all files were OK.
|
J.Todd |
|
OP | Post 8 made on Saturday February 9, 2008 at 18:22 |
burntout Lurking Member |
Joined: Posts: | February 2008 8 |
|
|
The ir codes worked correctly too?
|
|
Post 9 made on Saturday February 9, 2008 at 18:58 |
J.Todd Long Time Member |
Joined: Posts: | August 2007 481 |
|
|
On February 9, 2008 at 18:22, burntout said...
The ir codes worked correctly too? They were in the correct places. I don't have the same equipment to test the ir codes.
|
J.Todd |
|
Post 10 made on Sunday February 10, 2008 at 11:54 |
cassidycaid Founding Member |
Joined: Posts: | October 2001 256 |
|
|
Did you test the codes from the editor software?
|
Scientific method refers to the body of techniques for investigating phenomena, acquiring new knowledge, or correcting and integrating previous knowledge. |
|
Post 11 made on Sunday February 10, 2008 at 12:53 |
J.Todd Long Time Member |
Joined: Posts: | August 2007 481 |
|
|
On February 10, 2008 at 11:54, cassidycaid said...
Did you test the codes from the editor software? Yes I checked in the emulator.
|
J.Todd |
|
OP | Post 12 made on Monday February 11, 2008 at 01:09 |
burntout Lurking Member |
Joined: Posts: | February 2008 8 |
|
|
So tommarow I'm going to install the software on another one of my laptop's and see if that works. Maybe it seems to be my laptop. I have reinstalled the program on this laptop and it didnt work. For some reason theres an issue when I try to change it on this laptop. I know its not the remote because when I put the orginal template that wasnt programed from this laptop, it works just fine. What do you guys think?
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|