|
|
|
The following page was printed from RemoteCentral.com:
Too close to the cable box? Weird!
| |
|
Topic: | Too close to the cable box? Weird! This thread has 13 replies. Displaying all posts. |
|
Post 1 made on Friday October 6, 2006 at 18:23 |
SOUND.SD Loyal Member |
Joined: Posts: | April 2006 5,523 |
|
|
I am very familiar with RF interference but this is something else. Of my 200+ remotes this is a first.... here goes:
Philips Plasma (dont ask) Yamaha Receiver Yamaha DVD player SA 8300HD cable box MX850 Ch E MRF250 Ch E Gear behind doors to the back left of the room.
Problem: When the client gets within 4 feet (approx) of the equipment location ALL cable box functions on the remote stop working. This is a problem because the equipment is above part of the seating area in a fairly small room so about 1/3 of the room is plagued. It even seems to affect IR with the doors open (from the MX remote only, the SA remote works fine). WTF! Why does it matter how close it is to the gear? Could it be a light or something else in the area? It seems to be affecting a specific zone/sphere.
By the way.... All other functions work fine from anywhere!
Thanks in advance!
Corey
|
Bulldog AV - San Diego, CA www.bulldog-av.com[Link: facebook.com] |
|
Post 2 made on Friday October 6, 2006 at 19:30 |
SJHart Long Time Member |
Joined: Posts: | December 2003 383 |
|
|
I'm no expert, but I know that when I had a SA 8300HD, it put out RF interference like no other device I owned! SJ
|
|
OP | Post 3 made on Friday October 6, 2006 at 20:46 |
SOUND.SD Loyal Member |
Joined: Posts: | April 2006 5,523 |
|
|
Ya, but it should put out interference to the MRF regardless of how close the remote is to the equipment.
|
Bulldog AV - San Diego, CA www.bulldog-av.com[Link: facebook.com] |
|
Post 4 made on Friday October 6, 2006 at 22:31 |
GregoriusM RC Consultant |
Joined: Posts: | December 1999 9,809 |
|
|
The MRF might be shielding the interference just fine while the remote is picking up the interference.
You DO have a uniqe one here, Corey!
|
When ignorance is bliss, ‘tis folly to be wise. |
|
Post 5 made on Friday October 6, 2006 at 23:08 |
pilgram Loyal Member |
Joined: Posts: | November 2004 5,684 |
|
|
Have you tried setting the 850 to RF only for the cable box?
If there is ANY chance that the box is receiving the 250's IR (slightly delayed) as well as the 850's IR, it won't function properly. Keep in mind the 850 has a very powerful IR blaster built in to it. I've noticed that you can control things in a room when the remote is aimed in the opposite direction.
Is the cabinet completely sealed when the doors are shut?
On the 250, are you using emitters our the built in blaster?
|
Every day is a good day.......some are just better than others!
Proud to say that my property is protected by a high speed wireless device! |
|
Post 6 made on Friday October 6, 2006 at 23:56 |
Ericjb Active Member |
Joined: Posts: | February 2004 655 |
|
|
Try removing the antenna. I've had MRF-250s quit working when you get 4-5 feet from them and removing the antenna made all the difference. They would work great 5'-60'+ feet away, but not at 5' or less. It isn't common, but I've had it happen to me on an occasion or two.
|
There are 10 types of people in this world, There are those who understand binary, and those who don't! |
|
OP | Post 7 made on Saturday October 7, 2006 at 03:00 |
SOUND.SD Loyal Member |
Joined: Posts: | April 2006 5,523 |
|
|
Thanks guys! I did remove the antenna. In fact I remove the antenna on almost every install with a 250.
Pilgram: I dont have it in RF only mode but with the cabinet doors closed the IR shouldnt be effecting it, right?
The blaster is on, but again why would it work from 4+ feet away?
It works perfectly from just outside the perimeter/sphere..... doors open or closed.
More and more I am thinking it is something interferring with the command being sent (subwoofer or light fixture) not the command being received like is usually the case.
|
Bulldog AV - San Diego, CA www.bulldog-av.com[Link: facebook.com] |
|
Post 8 made on Tuesday October 10, 2006 at 12:20 |
Control Remotes Super Member |
Joined: Posts: | August 2003 3,434 |
|
|
I've seen things like this happen before. Try turning off the front blaster of the MRF and see if that helps. Thank you, Damon DG = = = = = http://www.ProRemotes.com - Authorized Dealer & Remote Programming Services
|
Remote Programming Services for URC Remotes http://www.PremierAVDesigns.com - 914-509-5360 Follow me on Twitter @HomeTheaterNY |
|
Post 9 made on Tuesday October 10, 2006 at 17:37 |
tippy-tie Long Time Member |
Joined: Posts: | July 2004 479 |
|
|
1. Find a native american souvenier shop. 2. Buy a dream catcher 3. Write "interference" on a sticky note. Place sticky on dream catcher 4. hang dream catcher on the basestation. 5. come over and talk to us in the RTI forum about future projects.
Last edited by tippy-tie
on October 12, 2006 16:30.
|
|
OP | Post 10 made on Tuesday October 10, 2006 at 19:45 |
SOUND.SD Loyal Member |
Joined: Posts: | April 2006 5,523 |
|
|
On October 10, 2006 at 17:37, tippy-tie said...
1. Find a native american souvenier shop.
2. Buy a dream catcher
3. Write "interference" on a sticky note. Place sticky on dream catcher
4. hanger dream catcher on the basestation.
5. come over and talk to us in the RTI forum about future projects. If all other posters in the RTI forum are as helpful as yourself, I cant wait to make the switch!
|
Bulldog AV - San Diego, CA www.bulldog-av.com[Link: facebook.com] |
|
Post 11 made on Wednesday October 11, 2006 at 00:42 |
remoteshoppe Long Time Member |
Joined: Posts: | March 2005 484 |
|
|
I ran into a lot of problems with the SA8300 and found that the box is very susceptibl to IR overload. It is very possible that even with the doors closed you are sending enough of an IR command to rebder the box useless. I brought my box back to Cablevision and swapped it out for a new one and it was 100x better. Apparently there was a firmware update somewhere down the line that addressed some of the boxes problems.
Not to knock URC but I'll also admit that I set up an RTI system in the same environment in about 1/20th of the time with the RF working flawlessly without any tweaks, trials or tribulations.
|
|
|
Post 12 made on Friday October 13, 2006 at 04:20 |
algogocom Lurking Member |
Joined: Posts: | October 2006 1 |
|
|
On October 10, 2006 at 17:37, tippy-tie said...
1. Find a native american souvenier shop.
2. Buy a dream catcher
3. Write "interference" on a sticky note. Place sticky on dream catcher
4. hang dream catcher on the basestation.
5. come over and talk to us in the RTI forum about future projects. It is so clear and so useful. Thank you and wish evryone coming here have a nice weekend! Rgds, http://www.algogo.com
|
Algogo.com |
|
OP | Post 13 made on Monday October 16, 2006 at 19:36 |
SOUND.SD Loyal Member |
Joined: Posts: | April 2006 5,523 |
|
|
|
Post 14 made on Tuesday October 17, 2006 at 03:20 |
JonW747 Active Member |
Joined: Posts: | September 2006 621 |
|
|
*laughs*
I'm guessing he just wants people to click through to his e-store.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|