On August 9, 2007 at 03:43, yoda98mnt said...
Hi,
I habe a AVR-4306 and I will control ther AVR with a RP-6
connect with a CM-232.
I send "PWSTANDBY\r" from the T2-c, notthing.
I conect the AVR with my PC (RS232, wenn a turn off the
AVR I can see that the AVR is going down. To view the
RS232 i use SerialTool. What must I do to activate the
RS232 in the AVR-4306?
Gruß Volker
You most likely will need to connect a ground wire between the ground terminal on the RP6 and the phono ground lug on the receiver.
