|
|
|
Audio, Receivers & Speakers Forum - View Post
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Post 93 made on Sunday September 30, 2007 at 22:13 |
bisonguy Lurking Member |
Joined: Posts: | September 2007 1 |
|
|
Many thanks to plazman30 and everyone else who contributed to this thread. I have a Kenwood VR-507 and I use a Harmony 659 remote. I started getting intermittent problems with volume control and then eventually total failure. I blamed the Harmony at first but after trying the original remote I realized that the receiver was the problem. Figuring it would not be worth trying to fix the receiver I was about to start looking for a replacement when I found this forum. I found I had the problem with the solder joints, just as described. It only took about 15 minutes to do the fix. I had to add a little solder on two of the joints. Receiver now works great. Again, many thanks for the great advice including the photos and instructions.
|
|
|
|
|
|
|