This is a loooong shot, but try the following:

(1) Obtain a One-for-All three-digit set up code for the device you want to program, for example from Rob's site ( www.hifi-remote.com ) or from the archives at www.oneforall.com. Note that you need the three digit codes that were used with the older models, not the newer four-digit codes.

(2) Add 17 to it.

(3) Press and hold "set up" until the LED blinks (or lights steadily, I'm not sure which)

(4) WHILE CONTINUING TO HOLD DOWN "set up", enter the three digits you got at step 2 above.

Remember, this is an old remote, it may not have many of the newer devices or codes in it.

Hope that works!!!