Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 4 made on Tuesday September 24, 2024 at 06:05
ulnaoperating
Junior Member
Joined:
Posts:
March 2024
3
On April 17, 2024 at 09:53, miggy_wiggy said...
Hi everyone I'll try and be as detailed as I can

I'm currently having an issue with a Bell VIP5662w box, the box works with a Bluetooth remote however I've reset the box and removed the Bluetooth remote from the equation, and the box only works through IR now. gorilla tag

The strange issue that I'm having is;

the none of IR blasters off of the the mrf260 are able to control the the box, I've moved the position over the entire front face of the box, I have tried different blasters, I've used both variable and fixed outputs of the MRF, I've changed the blaster strength on the MRF through the whole range available.

All other devices inside of this cabinet are working correctly.

the only way I am able to get it to work currently is using the mrx 890 with the cabinet doors open AND I have to point the remote AWAY from the box i.e. at the wall on the opposite side of the room, pointing the remote directly at the box results in nothing working. I haven't come across this problem before usually with bell remotes I've just had to mess around with placement but it's usually worked out otherwise am I missing something?

Could you please clarify which codes you are referring to? The RF base stations and remote controls used by various cable boxes employ different infrared (IR) codes.


Hosting Services by ipHouse