Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 5 made on Saturday April 2, 2022 at 11:52
kdp99
Long Time Member
Joined:
Posts:
April 2004
143
On April 1, 2022 at 11:15, tomciara said...
You probably know this, but the emitter has to be placed precisely in front of the window on the device. Which device is not responding? Are you sure the emitter is in the right place? A bright flashlight will often reveal an opaque spot smaller than a dime that you have to nail with the emitter location.

And CCP software has to be set to the same RF ID as the base station.

AND you sometimes have to move the antenna around, even collapse the antenna to the folded up position to prevent interference from nearby devices, especially cable boxes. Make sure the activity LED is not glowing in the slightest when no button is pressed.

Thanks for the thoughts, I do not use the flashers usually but just plugged them in as a test, with the MX260i 2 foot away from a Sky+HD box I get no responce using the MX260i, but using the remote 10 foot away all is fine.

There is no flicker on the MX260i unless I Press a remote button, and my MX250 worked with an MX850 fine for yers.


Hosting Services by ipHouse