Any helpful ideas with this.

I have used an MX980 for months now and all is well. I moved to an MX980i so I could use an MX260i base station I had.

I could not find any setting in CCP for the i, so just used the exisitng file I used for the MX980 and added an MRF260.

The channel in CCP and on the MRF260i is #1. When I try and use the base station the MRF260i blinks showing the signal is being received OK but does not opperate the device.

I know the RF environmet is OK as for years my MX850 and MRF250 worked fine.

I also tried an MRF350i and got the same problem. BUT I only have the MRF350i and no antenna so used an RX150 I had lying about, so this may not be a fair test .


Thanks