Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 1 made on Tuesday June 16, 2020 at 15:26
icarusd
Long Time Member
Joined:
Posts:
September 2006
54
Hello,

I use CCP with an IPad controller and a MRX 2. The database for a SB 5645 (Matrix Switch 3291) works just fine, but the data in the software is not complete, it's set up for a 4x4 switch and my switch is 8x8. So, there are inputs and outputs plus some functionality that aren't in the database. I have the HEX codes from the manual but I can't seem to find a solution to add those so the serial connection (and it's more dependable functionality) will work. If anyone can point me to a site to teach me how to convert these (or write them) and then how I can augment what's in the CCP serial database, I'd be grateful. I generally can figure this out myself (mostly because of a lot of the posts on this site), but I've not been able to find a solution to this.

The functions I need are (followed by the HEX code if that will help).

Enter 01FD B34C
EDID 01FD B748
SOURCE #8 : 01FD 08F7
SOURCE #6 : 01FD 06F9
SOURCE #5, DST #1 : 01FD 15EA
SOURCE #6 DST #1: 01FD 16E9
SOURCE #8, DST #1 : 01FD 18E7
SOURCE #5, DST #6: 01FD 659A
SOURCE #6, DST #6: 01FD 6699
SOURCE #8, DST #6 01FD 6897

Really appreciate the help, I rarely post because you can usually find what you need pretty easy here, but I haven't been able to find this solution.

-Derek
Icarus D


Hosting Services by ipHouse