Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Professional Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 2 made on Tuesday April 10, 2018 at 19:27
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
According to this post on the Web, the Direct TV code are the same across all units.

[Link: forums.att.com]

The RC73 is a remote that can be configured for either IR or RF.

Not sure if the info below will work but is worth a try.

You might want to try the HR24 file from here.

[Link: files.remotecentral.com]

You will need either ProntoEdit or TouchScreenSetup to open this file or perhaps you have some other CCF viewer that might let you extract the codes. I found this note on Wikipedia about a tool named CCFExtractor that seems to fit the bill of what you need.

[Link: etcwiki.org]

Also, have a look here and you will find 2 sets of discrete power codes. If either of these 2 sets works, you can look for pronto configurations of the same model (for example H23) and likely be able to use those codes.

[Link: files.remotecentral.com]
Lyndel McGee
Philips Pronto Addict/Beta Tester


Hosting Services by ipHouse