Post 5 made on Tuesday January 30, 2018 at 13:55 |
TonyCove Long Time Member |
Joined: Posts: | February 2017 22 |
|
|
Check your PM.
in the programming section of Design Center, look for the prefix in the folders for H/M/L, those have the tasks for the stepped dimming. Since Integration Designer can't emulate the press and hold dimming function on the vantage side, i found this to be a viable alternative. Toggling the "Phantom Keypad" button map on the RTI side will just step the task on the vantage side thru each stepped dimming value you program into the task. My base Values are 100, 49, 9 and 0. each load or scene you want to do this with will need its own dedicated Numerical Variable to keep track of what state the load is in, make sure you keep the loads variable value "persistent" that way the vantage system will keep the load/Dim Value synced after a reboot, upload etc. Hope this helps
|
|
|