Your Universal Remote Control Center
One For All & Radio Shack Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 2 made on Monday January 11, 2016 at 00:52
Select Member
August 2009
The remote is normally arranged to send digits, channel+/- and OK/Select using the cable box setup codes even when the remote is in TV mode.  Most people find having the digits and Ch+/- going to the cable box is convenient, so turning off this "channel lock" feature (you could use the 993 command to change it) is generally not a good approach.  Instead apply a keymove to the OK/Select button using the 994 command.  We need to know what TV setup code you're using in order to specify the correct EFC, but I'll guess that you're using either setup code TV 0818 (so try EFC 59861)  or setup codes TV 0093 or TV 0688.  In that case try EFC  00221 or 0222.

I recommend using setup code 0818--using it you can add other specialty functino like the Applications button (assuming your OEM remote has such a button)

Hosting Services by ipHouse