Your Universal Remote Control Center
RemoteCentral.com
Audio, Receivers & Speakers Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 3 made on Wednesday February 11, 2015 at 03:49
yoavts
Lurking Member
Joined:
Posts:
January 2015
6
first - thank you for the detailed answer!
i'll try to explain the situation a bit different... maybe it will be clearer...
the link line is like this:
==> IR receiver eye to ==> IR connection block with ==> output for 6 IR emitters.
example for the IR kit:
found video at
the kit looks the same inside and outside just the brand label change.
what i did was:
i took a 3.5mm cable from the output of the IR connection block to the Marantz RCA "remote in" input (works as a "rear emitter"). and disable the Marantz front panel IR eye.
and what happend is:
when the Marantz is the only device attached to the IR connection block i can control the Marantz with the remote.
when i attach one more emitter to the connection block the Marantz stop responding to the remote commands.
hope it is clearer now...
thanks!!!!
yoavts


Hosting Services by ipHouse