Your Universal Remote Control Center
RemoteCentral.com
Original Equipment Remotes Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 1 made on Friday January 13, 2012 at 10:53
Dan356
Lurking Member
Joined:
Posts:
January 2012
4
Hi all,

I've been using my Pront RC990 for a number of years now with no real problems in learning or reproducing IR codes for my equipment.

However, I've recently purchased a remote control roller blind system from Amazon, which sourced the product from www.y2shop.com based (clearly!) in China.

Even though PPENG says it succesfully learns the Up and Down codes for the supplied remote, it cannot reproduce them when downloaded to the Pronto. Nothing happens - not even a flash from the red LED on the motor (which is what happens when it receives a signal from the supplied remote).

I've tried pasting the codes into RC5toHEX but even when a new code is generated (albeit without changing any of the settings) there is still no joy when downloaded to the Pronto.

Can anyone make any suggestions or offer any advice to get these codes working? There is no useful information on the remote, just a model no of HT-100.


Hosting Services by ipHouse