The following page was printed from RemoteCentral.com:
Before you continue!
This file area has been replaced with a newer one! As of 2011, this section is no longer being updated, and some files may show as unavailable. For free access to all of these downloads and many newer ones, visit our NEW file area at: http://files.remotecentral.com
You are currently browsing through the Philips Pronto NG TSU3000, TSU3500, RU950, RU960, ProntoPro NG TSU7000, TSU7500, RU980, RU990, Marantz RC5400 & RC9500 file area. To return to the beginning click here.
I threw this utility together to generate Pronto codes from the IR codes that Denon publishes on their website. I suspect that it will work with any Sharp coding, although I haven't tried it. There are codes in the Denon docs that aren't available on the remote, so this opens up some new options. To use it, enter the bit stream into the 4 input boxes. They are (from left to right) System Address (C1-C5), Data (c6-C11), Extension(C12, C13), and Data Construction (C14, C15), as described in the Denon documents. Then click Calculate (or press the enter key). The Pronto code will be shown in the lower window. It is also automatically copied to the clipboard so you can quickly paste it into the Pronto editor. Note: you should always set C15, and C15 to '00'.
Important: This program requires the Microsoft .NET framework to operate!
