The following page was printed from RemoteCentral.com:
Before you continue!
This file area has been replaced with a newer one! As of 2011, this section is no longer being updated, and some files may show as unavailable. For free access to all of these downloads and many newer ones, visit our NEW file area at: http://files.remotecentral.com
You are currently browsing through the Philips Pronto NG TSU3000, TSU3500, RU950, RU960, ProntoPro NG TSU7000, TSU7500, RU980, RU990, Marantz RC5400 & RC9500 file area. To return to the beginning click here.
This file contains codes for a Kingpin motorized projection screen, which uses RF.
Notes:
Added one 'once burst' pair just in case, it is not part of protocol and can be removed.
I use SAW filter modified TSU3000, transmission time for codes is 0.3s If there are code differences on Kingpin remotes, you should be able to teach new remote. See Kinpin UG.
Kingpin receiver is poor. I could first reach only 30cm distance.
Receiver has only 3mm dia copper coil antetenna. I added 17cm cable on it on point where coil is connected to transistor(?). See attached lousy picture.
SAFETY NOTE: Receiver unit is connected to mains - 230V can be very unhealthy. If you don't know or understand what you are doing ask some professional to do antenna modification.